Potentiometer for Nashville 112, Presence control

[KENNY KRUPNICK]

Where is a good resource to get a new Potentiometer for a Nashville 112, Presence control? Broke off with the knob. Thanks in advance.

[Ronald Sikes]

Peavey should have them. I make the knob guard if you have any interest in one.

[Mike Auman]

The Peavey part numbers are 31190511 (current #) or 71190511 (previous #), it's a B50K linear pot with bracket, 16mm, PC mounted, 3/16 inch knurled shaft. The High, Low, Mid and Presence pots are all the same. Here is a US source: https://www.amprepairparts.com/peaveypots.htm

peaveybracket.jpg

[KENNY KRUPNICK]

I have 2, Nashville 112's, and they are the earlier ones. They are the blue colored amps that Peavey made in several colors. So which potentiometer would I need since the shaft is plastic? I bought both amps from Bobbe Seymour. I wish Peavey would have utilized potentiometer's with metal shafts. Thanks in advance.

[Michael Haselman]

Peavey is great for getting replacement parts. I recently got 2 pots, for gain and master volume (same part number) and all new chicken head knobs for my NV112. Very reasonably priced!

[KENNY KRUPNICK]

Hi Michael, Do you have the contact info to order parts thru Peavey? Thanks in advance.

[Jim Palenscar]

I have replaced at least 6 of the 112's mid pots in the past 3 months as when they go out they have a distinct pop like a gunshot as opposed to the typical scratchy noise that is more typical of volume pedal pots. I now order them in quantities of 6 pots. Interesting that the Peavey repair guy said he'd never heard of it.

[Michael Haselman]

Kenny, I remember I ordered over the phone. I don't have the number but it's probably googleable. Hey, I think I just invented a new word!

[Michael Haselman]

1-800-821-2279 is the number for Peavey parts ordering.